P3D PrintMargin
THE PRINT SHOP WORKBOOK

Printer electricity measurement worksheet

Turn plug-in meter readings into energy cost and average power, with a repeatable record of test conditions.

kWh
kWh
hours
currency/kWh
W
hours

Method: measure energy, then derive power

Run energy = end kWh − start kWh. Average watts = run kWh ÷ elapsed hours × 1,000. Run cost = run kWh × electricity rate. Standby energy = standby watts ÷ 1,000 × idle hours. End reading cannot be less than start reading. The meter should measure the intended device or group consistently.

Illustrative calculation, not a printer benchmark

A meter rising from 12.50 to 13.22 kWh during six hours records 0.72 kWh. Average power is 120 W and energy cost at $0.18/kWh is $0.1296. These are teaching values; no measurement of a named printer is claimed. The same energy use can include brief heating peaks and lower steady operation.

A repeatable test protocol

Record printer model, firmware, material, nozzle and bed settings, enclosure, room conditions, slicer profile, model revision and meter details. Start before preheating if preheating is part of your cost boundary; stop after the chosen cooldown boundary. Record the duration using the same start and stop events. Do not compare one test that excludes warmup with another that includes it.

Separate productive and idle energy

Measure standby independently and estimate idle hours separately from run hours. A shared outlet containing a dryer, computer or wash station measures the group; label it clearly. Repeat comparable runs and report the range, test dates and number of observations rather than presenting one reading as universal.

Build a publishable test record

Keep the meter start/end photos, test setup photo, slicer estimate and exact boundary notes. Use the documentation guide before publishing a case study. A cost worksheet is not a laboratory certification or a recommendation for a particular meter.

All business tools · Methodology