How to document a real 3D print job
A practical evidence checklist for batch products, custom parts, plate comparisons and measured power tests.
Publish evidence you actually collected
The worked examples on this site are illustrative. This guide explains how to turn a completed print job into a documented case study. It does not claim that a named printer was tested or that a fictional scenario was a customer order. Remove customer names, addresses, order numbers and private designs unless publication is authorized.
Record 1: a repeatable batch product
Choose one product and file revision. Save the slicer profile and estimated weight, print time, plate quantity and cost. Photograph the plate and finished items without identifying customer information. Record consumed material across all attempts, active work, occupied printer time, packaging and actual fees. Use the actual-cost tracker to reconcile estimated and actual cost. Explain one discrepancy and what changed in the next quote.
Record 2: a custom part with design labour
Keep the initial scope and revision count alongside time spent designing, communicating, preparing the file, finishing and packing. Separate the one-time design work from repeat production. Explain whether the design charge was recovered on the first order or intentionally spread over an expected repeat run. Do not publish a customer CAD file or photograph without permission. Compare the final cost with the price, with taxes and refunds treated consistently.
Record 3: two plate layouts for the same product
Hold material, quality target and finishing standard constant. Record the slicer settings and observed saleable yield for both layouts. Use comparable runs rather than a reliable layout compared with an untested optimistic estimate. Enter the totals into batch comparison. Discuss occupied time, active work, unit cost and contribution per printer-hour separately. Report the number of runs and any outlier failures.
Add a measured electricity appendix
Use the electricity worksheet. Preserve start/end meter photos, elapsed time, printer settings, what devices were on the measured outlet and whether warmup/cooldown were included. Report repeated results or state explicitly that there was only one observation. A single job’s average watts is not a universal specification for that printer.
A concise publication structure
Use: question, equipment and date, method, raw inputs, observed output, comparison with estimate, explanation, limitations and next action. Label estimates, measurements and conclusions separately. A failure is useful evidence when the conditions and cost are clear. Keep the original records so later corrections can be checked.
How to contribute a documented example
The publisher can review proposed examples through the contact email. Send a brief description first and avoid private files or customer details. Publication requires enough evidence to distinguish real observations from assumptions; the site does not promise to publish every submission. Until evidence is available, use the clearly labelled illustrative examples.